[M4IF Technotes] About Advanced Simple Profile tools

Rob Koenen rob.koenen m4if.org
Thu Nov 7 22:19:26 EST 2002


Don't ask me to devise a testing strategy for you :-)
There are conformance bitstreams for ASP but I am unsure
about their general availability. Perhaps someone else
on the list knows if they are already available or when
they will be if not now.
In the future, M4IF will be able to help you with bistreams,
but that is of little help for you now.
Good luck,
Rob
> -----Original Message-----
> From: Xue Xuhong [mailto:xxh   soft.thtf.com.cn] 
> Sent: Thursday, November 07, 2023 22:17
> To: rob.koenen   m4if.org; technotes   lists.m4if.org
> Subject: Re: [M4IF Technotes] About Advanced Simple Profile tools
> 
> 
> Hi, Rob:
> 
> I am developing an ASP decoder, and what I based is Core 
> Profiledecoder. So that only three tools need to be 
> implement. They are: 1)Interlace 2)GMC  3)1/4-pel MC
> 
> To implement the ASP decoder, I should implement all tools in 
> the profile to be compliant, but when I need to test the ASP 
> decoder ,I use the following bitstream files:
> 1) bitstream file only used Interlace( based on Core profile 
> ) 2)bitstream file only used GMC ( based on Core profile ) 
> 3)bitstream file only used 1/4-pel MC( based on Core profile 
> ) 4)bitstream file used both Interlace  and GMC( based on 
> Core profile ) 5)bitstream file used both Interlace  and 
> 1/4-pel MC( based on Core profile ) 6)bitstream file used 
> both GMC  and 1/4-pel MC( based on Core profile ) 7)bitstream 
> file used Interlace,GMC and 1/4-pel MC( based on Core profile )
> 
> Is it OK?
> 
> Thank you.
> 
> Regards,
> Xue Xuhong
> 
> 
> 
> 
> 
> 
> ----- Original Message -----
> From: "Rob Koenen" <rob.koenen   m4if.org>
> To: "'Xue Xuhong'" <xxh   soft.thtf.com.cn>; <technotes   lists.m4if.org>
> Sent: Friday, November 08, 2023 1:48 PM
> Subject: RE: [M4IF Technotes] About Advanced Simple Profile tools
> 
> 
> > In an ENcoder, you can do what you want as long as you do not use 
> > tools that aren't in the profile (and you observe the level 
> > restrictions). If you use only a part of the too set, you can still 
> > output a compliant bistream (although your quality may be 
> significant 
> > behind that of your
> > competition)
> >
> > I na DEcoder, you MUST implement all tools in the profile to be 
> > compliant.
> >
> > Of course there are more tools than just the three you 
> mention, such 
> > as B frames (and P frames, etc. etc.)
> >
> > Note that Interlace is not required in the lower levels 
> (1,2,3 and 3a)
> >
> > For more information, see http://www.m4if.org/resources.php towards 
> > the bottom.
> >
> > Best,
> > Rob
> >
> > > -----Original Message-----
> > > From: Xue Xuhong [mailto:xxh   soft.thtf.com.cn]
> > > Sent: Thursday, November 07, 2023 19:35
> > > To: technotes   lists.m4if.org
> > > Subject: [M4IF Technotes] About Advanced Simple Profile tools
> > >
> > >
> > > Hi,
> > >
> > > I am doing some work about Advanced Simple Profile(ASP), I know 
> > > three tools are used in ASP,they are: 1)Interlace 2)GMC 
> 3)1/4-pel MC
> > >
> > > I wonder if there are bitstream files that only used 
> Interlace tool, 
> > > only GMC tool, or only 1/4-pel MC tool?
> > >
> > > That is, should the three tools must be used together to 
> implement 
> > > ASP, they can not be used separately?
> > >
> > >
> > >
> > > Thank you.
> > >
> > > Regards,
> > > Xue Xuhong
> > >
> > >
> > >
> > > _______________________________________________
> > > Technotes mailing list
> > > Technotes   lists.m4if.org 
> > > http://lists.m4if.org/mailman/listinfo/technotes
> > >
> 



More information about the Mp4-tech mailing list