[Mp4-tech] An MPEG4 question

[tech list]

Kind of off topic, but still :-)
First you need to get the video from the camcorder/tape into a PC. Please
use a 1394 (aka Firewire cable) or USB2.0 connection, and read up the
camcorder's manual on how to transfer the video to the PC. Make sure that
the video is stored in AVI format, with the video uncompressed. Otherwise
you would not get the best possible quality. Now use any of the available
codec packs (download free, buy) which support MPEG-4 to convert it to
a MPEG-4 file. Hope this helps.
On 2/9/06, Barbara McMullen <Barbara.McMullen marist.edu> wrote:
>
>
> All,
>
> I have been asked to ask you the following question:
>
> " What is the best way to convert a videotape (miniDV) into an MPEG4 file.
> we wnat to achieve the best possible quality."
>
> Thanks in advance.
>
> Barbara
> *****************************************************************
> Barbara E. McMullen
> Director
> Institute for Data Center Professionals (IDCP)
> barbara.mcmullen idcp.org
> 845-575-3114
> www.idcp.org
>
> Project Manager
> Center for Applied Research in Collaborative and On-Demand Computing, a
> NYSTAR-Designated College Applied Research and Technology Center (SM)
> Marist College, 3399 North Rd, Poughkeepsie, NY 12601
> Phone: 845-575-3588, Fax: 845-575-3095
> barbara.mcmullen marist.edu
> www.ccodc.marist.edu
>
>
>
> *Robin Zoo <robin94539 yahoo.com>*
> Sent by: mp4-tech-bounces lists.mpegif.org
>
> 02/08/2023 01:15 PM
>
>         To:        mp4-tech lists.mpegif.org
>         cc:
>         Subject:        [Mp4-tech] Buy H.264 Codec(Baseline Profile)
>
>
> Hi experts,
>
> I am looking for H.264 codec IP supporting Baseline
> profile for use with Wi-Fi/WiMax modules. I have
> following questions to ask:
>
> 1. How to verify the correctness of the IP(I don't
> 100% trust vendor's test kits)? Is there any third
> party's test and evaluation kits(such as JM reference
> code)? How do I know the performance such as power
> consumption, picture quality(bit-rate) amoung various
> vendors?
>
> 2. What kind of audio codec is prefered to use with
> the video codec?
>
> 3. What's the transport stream layer protocol
> handling/muxing video/audio/data bit-stream?
>
> 4. What else do I need to know when evaluating H.264
> codec IP?
>
>
> thanks in advance!
>
> Robin
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> NOTE: Please use clear subject lines for your posts. Include [audio,
> [video], [systems], [general] or another apppropriate identifier to indicate
> the type of question you have.
>
> Note: Conduct on the mailing list is subject to the Antitrust guidelines
> found at
> http://www.mpegif.org/public/documents/vault/mp-out-30042-Antitrust.php
>
>
>
> _______________________________________________
> NOTE: Please use clear subject lines for your posts. Include [audio,
> [video], [systems], [general] or another apppropriate identifier to indicate
> the type of question you have.
>
> Note: Conduct on the mailing list is subject to the Antitrust guidelines
> found at
> http://www.mpegif.org/public/documents/vault/mp-out-30042-Antitrust.php
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/mp4-tech/attachments/20060222/cae71d4c/attachment.html