[M4IF Technotes] Suggest some MPEG 4 Encoders

[Ralph Neff]

Iole,
ISMA members get the specification for free.
Non-members are supposed to purchase it from the ISMA
site ($150 for electronic version + company-wide license)
See: http://ism-alliance.tv/html/resources/techspecs.shtml
-Ralph
-----Original Message-----
From: iole moccagatta [mailto:imoccaga   lsil.com]
Sent: Tuesday, June 18, 2023 1:35 PM
To: Ben Waggoner
Cc: m4if tech notes
Subject: Re: [M4IF Technotes] Suggest some MPEG 4 Encoders
Ben,
Ben Waggoner wrote:
> Iole,
>
>     AFAIK, yes on GMC and 1/4 pel.  The encoder doesn't do interlaced,
> although the decoder might.  QT6's MPEG-4 support targets the ISMA
profiles,
> which don't include interlaced.
>

thanks for the info. Are ISMA profiles publicly available ? If so, how can I
get
them?
Regards,
    Iole
============================================================================
==
=       Iole Moccagatta, Ph.D.
=
=
=
=       LSI Logic                          e-mail: iole.moccagatta   lsil.com
=
=       1778 McCarthy Blvd.                Phone: +1.408.954-3101
=
=       Milpitas CA 95035                  Fax:   +1.408.954-3599
=
=       WWW: http://www.lsilogic.com
=
=
=
=
=
=  "Spatium...ultima confinia.... Haec sunt itinera astranavis
=
=   Incepti. Huic missio quinque annorum: explorare mundos alienos novos,
=
=   petere vitam novam novosque cultus, ire fortiter quo nemo iverit
=
=   ante."
=
=
=
============================================================================
==
_______________________________________________
Technotes mailing list
Technotes   lists.m4if.org
http://lists.m4if.org/mailman/listinfo/technotes