[Mp4-tech] [H.264 AVC] changes between JM 12_4 and JM_13
Anne Sophie Bacquet
annesophie.bacquet gmail.com
Wed Dec 19 11:42:00 EST 2007
Skipped content of type multipart/alternative-------------- next part --------------
# New Input File Format is as follows
# <ParameterName> = <ParameterValue> # Comment
#
# See configfile.h for a list of supported ParameterNames
#
# For bug reporting and known issues see:
# https://ipbt.hhi.de
##########################################################################################
# Files
##########################################################################################
InputFile = "C:\VS\JM_12_4_Pat\bin\sequencesYUV\720p50_mobcal_ter.yuv" # Input sequence
InputHeaderLength = 0 # If the inputfile has a header, state it's length in byte here
StartFrame = 2 # Start frame for encoding. (0-N)
FramesToBeEncoded = 1 # Number of frames to be coded
FrameRate = 50.0 # Frame Rate per second (0.1-100.0)
SourceWidth = 1280 # Frame width
SourceHeight = 720 # Frame height
TraceFile = "C:\VS\JM_12_4\bin\Sorties\trace_pred_matlab5.txt"
ReconFile = "test_rec.yuv"
OutputFile = "C:\VS\JM_12_4\bin\Sorties_264\mobcal_matlab_im2.264"
##########################################################################################
# Encoder Control
##########################################################################################
ProfileIDC = 77 # Profile IDC (66=baseline, 77=main, 88=extended; FREXT Profiles: 100=High, 110=High 10, 122=High 4:2:2, 244=High 4:4:4, 44=CAVLC 4:4:4 Intra)
IntraProfile = 0 # Activate Intra Profile for FRExt (0: false, 1: true)
# (e.g. ProfileIDC=110, IntraProfile=1 => High 10 Intra Profile)
LevelIDC = 40 # Level IDC (e.g. 20 = level 2.0)
IntraPeriod = 3 # Period of I-pictures (0=only first)
IDRPeriod = 0 # Period of IDR pictures (0=only first)
AdaptiveIntraPeriod = 1 # Adaptive intra period
AdaptiveIDRPeriod = 1 # Adaptive IDR period
IntraDelay = 0 # Intra (IDR) picture delay (i.e. coding structure of PPIPPP... )
EnableOpenGOP = 0 # Support for open GOPs (0: disabled, 1: enabled)
QPISlice = 30 # Quant. param for I Slices (0-51)
QPPSlice = 30 # Quant. param for P Slices (0-51)
FrameSkip = 2 # Number of frames to be skipped in input (e.g 2 will code every third frame)
ChromaQPOffset = 0 # Chroma QP offset (-51..51)
DisableSubpelME = 0 # Disable Subpixel Motion Estimation (0=off/default, 1=on)
SearchRange = 16 # Max search range
MEDistortionFPel = 0 # Select error metric for Full-Pel ME (0: SAD, 1: SSE, 2: Hadamard SAD)
MEDistortionHPel = 0 # Select error metric for Half-Pel ME (0: SAD, 1: SSE, 2: Hadamard SAD)
MEDistortionQPel = 0 # Select error metric for Quarter-Pel ME (0: SAD, 1: SSE, 2: Hadamard SAD)
MDDistortion = 0 # Select error metric for Mode Decision (0: SAD, 1: SSE, 2: Hadamard SAD)
ChromaMCBuffer = 1 # Calculate Color component interpolated values in advance and store them.
# Provides a trade-off between memory and computational complexity
# (0: disabled/default, 1: enabled)
ChromaMEEnable = 0 # Take into account Color component information during ME
# (0: only first component/default, 1: All Color components)
NumberReferenceFrames = 5 # Number of previous frames used for inter motion search (0-16)
PList0References = 0 # P slice List 0 reference override (0 disable, N <= NumberReferenceFrames)
Log2MaxFNumMinus4 = 0 # Sets log2_max_frame_num_minus4 (-1 : based on FramesToBeEncoded/Auto, >=0 : Log2MaxFNumMinus4)
Log2MaxPOCLsbMinus4 = -1 # Sets log2_max_pic_order_cnt_lsb_minus4 (-1 : Auto, >=0 : Log2MaxPOCLsbMinus4)
GenerateMultiplePPS = 0 # Transmit multiple parameter sets. Currently parameters basically enable all WP modes (0: diabled, 1: enabled)
ResendPPS = 0 # Resend PPS (with pic_parameter_set_id 0) for every coded Frame/Field pair (0: disabled, 1: enabled)
MbLineIntraUpdate = 0 # Error robustness(extra intra macro block updates)(0=off, N: One GOB every N frames are intra coded)
RandomIntraMBRefresh = 0 # Forced intra MBs per picture
InterSearch16x16 = 1 # Inter block search 16x16 (0=disable, 1=enable)
InterSearch16x8 = 1 # Inter block search 16x8 (0=disable, 1=enable)
InterSearch8x16 = 1 # Inter block search 8x16 (0=disable, 1=enable)
InterSearch8x8 = 1 # Inter block search 8x8 (0=disable, 1=enable)
InterSearch8x4 = 1 # Inter block search 8x4 (0=disable, 1=enable)
InterSearch4x8 = 1 # Inter block search 4x8 (0=disable, 1=enable)
InterSearch4x4 = 1 # Inter block search 4x4 (0=disable, 1=enable)
IntraDisableInterOnly = 0 # Apply Disabling Intra conditions only to Inter Slices (0:disable/default,1: enable)
Intra4x4ParDisable = 1 # Disable Vertical & Horizontal 4x4
Intra4x4DiagDisable = 1 # Disable Diagonal 45degree 4x4
Intra4x4DirDisable = 1 # Disable Other Diagonal 4x4
Intra16x16ParDisable = 1 # Disable Vertical & Horizontal 16x16
Intra16x16PlaneDisable = 1 # Disable Planar 16x16
ChromaIntraDisable = 0 # Disable Intra Chroma modes other than DC
EnableIPCM = 1 # Enable IPCM macroblock mode
DisposableP = 0 # Enable Disposable P slices in the primary layer (0: disable/default, 1: enable)
DispPQPOffset = 0 # Quantizer offset for disposable P slices (0: default)
##########################################################################################
# B Slices
##########################################################################################
NumberBFrames = 2 # Number of B coded frames inserted (0=not used)
QPBSlice = 30 # Quant. param for B slices (0-51)
BRefPicQPOffset = -1 # Quantization offset for reference B coded pictures (-51..51)
DirectModeType = 1 # Direct Mode Type (0:Temporal 1:Spatial)
DirectInferenceFlag = 1 # Direct Inference Flag (0: Disable 1: Enable)
BList0References = 0 # B slice List 0 reference override (0 disable, N <= NumberReferenceFrames)
BList1References = 1 # B slice List 1 reference override (0 disable, N <= NumberReferenceFrames)
# 1 List1 reference is usually recommended for normal GOP Structures.
# A larger value is usually more appropriate if a more flexible
# structure is used (i.e. using HierarchicalCoding)
BReferencePictures = 0 # Referenced B coded pictures (0=off, 1=B references for secondary layer, 2=B references for primary layer)
HierarchicalCoding = 0 # B hierarchical coding (0= off, 1= 2 layers, 2= 2 full hierarchy, 3 = explicit)
HierarchyLevelQPEnable = 1 # Adjust QP based on hierarchy level (in increments of 1). Overrides BRefPicQPOffset behavior.(0=off, 1=on)
ExplicitHierarchyFormat = "b1r0b3r0b2e2b0e2b4r2" # Explicit Enhancement GOP. Format is {FrameDisplay_orderReferenceQP}.
# Valid values for reference type is r:reference, e:non reference.
ReferenceReorder = 1 # Reorder References according to Poc distance for HierarchicalCoding (0=off, 1=enable)
PocMemoryManagement = 1 # Memory management based on Poc Distances for HierarchicalCoding (0=off, 1=on)
BiPredMotionEstimation = 1 # Enable Bipredictive based Motion Estimation (0:disabled, 1:enabled)
BiPredMERefinements = 3 # Bipredictive ME extra refinements (0: single, N: N extra refinements (1 default)
BiPredMESearchRange = 16 # Bipredictive ME Search range (8 default). Note that range is halved for every extra refinement.
BiPredMESubPel = 2 # Bipredictive ME Subpixel Consideration (0: disabled, 1: single level, 2: dual level)
##########################################################################################
# SP Frames
##########################################################################################
SPPicturePeriodicity = 0 # SP-Picture Periodicity (0=not used)
QPSPSlice = 36 # Quant. param of SP-Slices for Prediction Error (0-51)
QPSP2Slice = 35 # Quant. param of SP-Slices for Predicted Blocks (0-51)
SI_FRAMES = 0 # SI frame encoding flag (0=not used, 1=used)
SP_output = 0 # Controls whether coefficients will be output to encode switching SP frames (0=no, 1=yes)
SP_output_name = "low_quality.dat" # Filename for SP output coefficients
SP2_FRAMES = 0 # switching SP frame encoding flag (0=not used, 1=used)
SP2_input_name1 = "high_quality.dat" # Filename for the first swithed bitstream coefficients
SP2_input_name2 = "low_quality.dat" # Filename for the second switched bitstream coefficients
##########################################################################################
# Output Control, NALs
##########################################################################################
SymbolMode = 0 # Symbol mode (Entropy coding method: 0=UVLC, 1=CABAC)
OutFileMode = 0 # Output file mode, 0:Annex B, 1:RTP
PartitionMode = 0 # Partition Mode, 0: no DP, 1: 3 Partitions per Slice
##########################################################################################
# CABAC context initialization
##########################################################################################
ContextInitMethod = 1 # Context init (0: fixed, 1: adaptive)
FixedModelNumber = 0 # model number for fixed decision for inter slices ( 0, 1, or 2 )
##########################################################################################
# Interlace Handling
#########################################################################################
PicInterlace = 0 # Picture AFF (0: frame coding, 1: field coding, 2:adaptive frame/field coding)
MbInterlace = 0 # Macroblock AFF (0: frame coding, 1: field coding, 2:adaptive frame/field coding, 3: frame MB-only AFF)
IntraBottom = 0 # Force Intra Bottom at GOP Period
##########################################################################################
# Weighted Prediction
#########################################################################################
WeightedPrediction = 0 # P picture Weighted Prediction (0=off, 1=explicit mode)
WeightedBiprediction = 0 # B picture Weighted Prediciton (0=off, 1=explicit mode, 2=implicit mode)
UseWeightedReferenceME = 1 # Use weighted reference for ME (0=off, 1=on)
##########################################################################################
# Picture based Multi-pass encoding
#########################################################################################
RDPictureDecision = 0 # Perform RD optimal decision between different coded picture versions.
# If GenerateMultiplePPS is enabled then this will test different WP methods.
# Otherwise it will test QP +-1 (0: disabled, 1: enabled)
RDPictureIntra = 0 # Perform RD optimal decision also for intra coded pictures (0: disabled (default), 1: enabled).
RDPSliceWeightOnly = 1 # Only consider Weighted Prediction for P slices in Picture RD decision. (0: disabled, 1: enabled (default))
RDBSliceWeightOnly = 0 # Only consider Weighted Prediction for B slices in Picture RD decision. (0: disabled (default), 1: enabled )
##########################################################################################
# Loop filter parameters
##########################################################################################
LoopFilterParametersFlag = 1 # Configure loop filter (0=parameter below ingored, 1=parameters sent)
LoopFilterDisable = 1 # Disable loop filter in slice header (0=Filter, 1=No Filter)
LoopFilterAlphaC0Offset = 0 # Alpha & C0 offset div. 2, {-6, -5, ... 0, +1, .. +6}
LoopFilterBetaOffset = 0 # Beta offset div. 2, {-6, -5, ... 0, +1, .. +6}
##########################################################################################
# Error Resilience / Slices
##########################################################################################
SliceMode = 0 # Slice mode (0=off 1=fixed #mb in slice 2=fixed #bytes in slice 3=use callback)
SliceArgument = 50 # Slice argument (Arguments to modes 1 and 2 above)
num_slice_groups_minus1 = 0 # Number of Slice Groups Minus 1, 0 == no FMO, 1 == two slice groups, etc.
slice_group_map_type = 0 # 0: Interleave, 1: Dispersed, 2: Foreground with left-over,
# 3: Box-out, 4: Raster Scan 5: Wipe
# 6: Explicit, slice_group_id read from SliceGroupConfigFileName
slice_group_change_direction_flag = 0 # 0: box-out clockwise, raster scan or wipe right,
# 1: box-out counter clockwise, reverse raster scan or wipe left
slice_group_change_rate_minus1 = 85 #
SliceGroupConfigFileName = "sg0conf.cfg" # Used for slice_group_map_type 0, 2, 6
UseRedundantPicture = 0 # 0: not used, 1: enabled
NumRedundantHierarchy = 1 # 0-4
PrimaryGOPLength = 10 # GOP length for redundant allocation (1-16)
# NumberReferenceFrames must be no less than PrimaryGOPLength when redundant slice enabled
NumRefPrimary = 1 # Actually used number of references for primary slices (1-16)
##########################################################################################
# Search Range Restriction / RD Optimization
##########################################################################################
RestrictSearchRange = 2 # restriction for (0: blocks and ref, 1: ref, 2: no restrictions)
RDOptimization = 0 # rd-optimized mode decision
# 0: RD-off (Low complexity mode)
# 1: RD-on (High complexity mode)
# 2: RD-on (Fast high complexity mode - not work in FREX Profiles)
# 3: with losses
CtxAdptLagrangeMult = 0 # Context Adaptive Lagrange Multiplier
# 0: disabled (default)
# 1: enabled (works best when RDOptimization=0)
FastCrIntraDecision = 1 # Fast Chroma intra mode decision (0:off, 1:on)
DisableThresholding = 0 # Disable Thresholding of Transform Coefficients (0:off, 1:on)
DisableBSkipRDO = 0 # Disable B Skip Mode consideration from RDO Mode decision (0:off, 1:on)
SkipIntraInInterSlices = 0 # Skips Intra mode checking in inter slices if certain mode decisions are satisfied (0: off, 1: on)
# Explicit Lambda Usage
UseExplicitLambdaParams = 0 # Use explicit lambda scaling parameters (0:disabled, 1:enable lambda weight, 2: use explicit lambda value)
FixedLambdaIslice = 0.1 # Fixed Lambda value for I slices
FixedLambdaPslice = 0.1 # Fixed Lambda value for P slices
FixedLambdaBslice = 0.1 # Fixed Lambda value for B slices
FixedLambdaRefBslice = 0.1 # Fixed Lambda value for Referenced B slices
FixedLambdaSPslice = 0.1 # Fixed Lambda value for SP slices
FixedLambdaSIslice = 0.1 # Fixed Lambda value for SI slices
LambdaWeightIslice = 0.65 # scaling param for I slices. This will be used as a multiplier i.e. lambda=LambdaWeightISlice * 2^((QP-12)/3)
LambdaWeightPslice = 0.68 # scaling param for P slices. This will be used as a multiplier i.e. lambda=LambdaWeightPSlice * 2^((QP-12)/3)
LambdaWeightBslice = 2.00 # scaling param for B slices. This will be used as a multiplier i.e. lambda=LambdaWeightBSlice * 2^((QP-12)/3)
LambdaWeightRefBslice = 1.50 # scaling param for Referenced B slices. This will be used as a multiplier i.e. lambda=LambdaWeightRefBSlice * 2^((QP-12)/3)
LambdaWeightSPslice = 1.50 # scaling param for SP slices. This will be used as a multiplier i.e. lambda=LambdaWeightSPSlice * 2^((QP-12)/3)
LambdaWeightSIslice = 0.65 # scaling param for SI slices. This will be used as a multiplier i.e. lambda=LambdaWeightSISlice * 2^((QP-12)/3)
LossRateA = 5 # expected packet loss rate of the channel for the first partition, only valid if RDOptimization = 3
LossRateB = 0 # expected packet loss rate of the channel for the second partition, only valid if RDOptimization = 3
LossRateC = 0 # expected packet loss rate of the channel for the third partition, only valid if RDOptimization = 3
NumberOfDecoders = 30 # Numbers of decoders used to simulate the channel, only valid if RDOptimization = 3
RestrictRefFrames = 0 # Doesnt allow reference to areas that have been intra updated in a later frame.
##########################################################################################
# Additional Stuff
#########################################################################################
UseConstrainedIntraPred = 0 # If 1, Inter pixels are not used for Intra macroblock prediction.
LastFrameNumber = 0 # Last frame number that have to be coded (0: no effect)
ChangeQPI = 16 # QP (I-slices) for second part of sequence (0-51)
ChangeQPP = 16 # QP (P-slices) for second part of sequence (0-51)
ChangeQPB = 18 # QP (B-slices) for second part of sequence (0-51)
ChangeQPBSRefOffset = 2 # QP offset (stored B-slices) for second part of sequence (-51..51)
ChangeQPStart = 0 # Frame no. for second part of sequence (0: no second part)
NumberofLeakyBuckets = 2 # Number of Leaky Bucket values
LeakyBucketRateFile = "leakybucketrate.cfg" # File from which encoder derives rate values
LeakyBucketParamFile = "leakybucketparam.cfg" # File where encoder stores leakybucketparams
NumberFramesInEnhancementLayerSubSequence = 0 # number of frames in the Enhanced Scalability Layer(0: no Enhanced Layer)
SparePictureOption = 0 # (0: no spare picture info, 1: spare picture available)
SparePictureDetectionThr = 6 # Threshold for spare reference pictures detection
SparePicturePercentageThr = 92 # Threshold for the spare macroblock percentage
PicOrderCntType = 0 # (0: POC mode 0, 1: POC mode 1, 2: POC mode 2)
########################################################################################
#Rate control
########################################################################################
RateControlEnable = 0 # 0 Disable, 1 Enable
Bitrate = 45020 # Bitrate(bps)
InitialQP = 0 # Initial Quantization Parameter for the first I frame
# InitialQp depends on two values: Bits Per Picture,
# and the GOP length
BasicUnit = 11 # Number of MBs in the basic unit
# should be a fractor of the total number
# of MBs in a frame
ChannelType = 0 # type of channel( 1=time varying channel; 0=Constant channel)
RCUpdateMode = 0 # Rate Control type. Modes supported :
# 0 = original JM rate control,
# 1 = rate control that is applied to all frames regardless of the slice type,
# 2 = original plus intelligent QP selection for I and B slices (including Hierarchical),
# 3 = original + hybrid quadratic rate control for I and B slice using bit rate statistics
#
RCISliceBitRatio = 1.0 # target ratio of bits for I-coded pictures compared to P-coded Pictures (for RCUpdateMode=3)
RCBSliceBitRatio0 = 0.5 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 0 (for RCUpdateMode=3)
RCBSliceBitRatio1 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 1 (for RCUpdateMode=3)
RCBSliceBitRatio2 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 2 (for RCUpdateMode=3)
RCBSliceBitRatio3 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 3 (for RCUpdateMode=3)
RCBSliceBitRatio4 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 4 (for RCUpdateMode=3)
RCBoverPRatio = 0.45 # ratio of bit rate usage of a B-coded picture over a P-coded picture for the SAME QP (for RCUpdateMode=3)
RCIoverPRatio = 3.80 # ratio of bit rate usage of an I-coded picture over a P-coded picture for the SAME QP (for RCUpdateMode=3)
RCMinQP = 12 # minimum QP value for rate control
RCMaxQP = 36 # maximum QP value for rate control
########################################################################################
#Fast Mode Decision
########################################################################################
EarlySkipEnable = 0 # Early skip detection (0: Disable 1: Enable)
SelectiveIntraEnable = 0 # Selective Intra mode decision (0: Disable 1: Enable)
########################################################################################
#FREXT stuff
########################################################################################
YUVFormat = 1 # YUV format (0=4:0:0, 1=4:2:0, 2=4:2:2, 3=4:4:4)
RGBInput = 0 # 1=RGB input, 0=GBR or YUV input
SeparateColourPlane = 0 # 4:4:4 coding: 0=Common mode, 1=Independent mode
BitDepthLuma = 8 # Bit Depth for Luminance (8...12 bits)
BitDepthChroma = 8 # Bit Depth for Chrominance (8...12 bits)
CbQPOffset = 0 # Chroma QP offset for Cb-part (-51..51)
CrQPOffset = 0 # Chroma QP offset for Cr-part (-51..51)
Transform8x8Mode = 0 # (0: only 4x4 transform, 1: allow using 8x8 transform additionally, 2: only 8x8 transform)
ReportFrameStats = 0 # (0:Disable Frame Statistics 1: Enable)
DisplayEncParams = 0 # (0:Disable Display of Encoder Params 1: Enable)
Verbose = 1 # level of display verboseness (0:short, 1:normal, 2:detailed)
########################################################################################
#Q-Matrix (FREXT)
########################################################################################
QmatrixFile = "q_matrix.cfg"
ScalingMatrixPresentFlag = 0 # Enable Q_Matrix (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag0 = 3 # Intra4x4_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag1 = 3 # Intra4x4_ChromaU (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag2 = 3 # Intra4x4_chromaV (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag3 = 3 # Inter4x4_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag4 = 3 # Inter4x4_ChromaU (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag5 = 3 # Inter4x4_ChromaV (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag6 = 3 # Intra8x8_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag7 = 3 # Inter8x8_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag8 = 1 # Intra8x8_ChromaU for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag9 = 3 # Inter8x8_ChromaU for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag10 = 2 # Intra8x8_ChromaV for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag11 = 3 # Inter8x8_ChromaV for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
########################################################################################
#Rounding Offset control
########################################################################################
OffsetMatrixPresentFlag = 0 # Enable Explicit Offset Quantization Matrices (0: disable 1: enable)
QOffsetMatrixFile = "q_offset.cfg" # Explicit Quantization Matrices file
AdaptiveRounding = 1 # Enable Adaptive Rounding based on JVT-N011 (0: disable, 1: enable)
AdaptRoundingFixed = 1 # Enable Global Adaptive rounding for all qps (0: disable, 1: enable - default/old)
AdaptRndPeriod = 1 # Period in terms of MBs for updating rounding offsets.
# 0 performs update at the picture level. Default is 16. 1 is as in JVT-N011.
AdaptRndChroma = 1 # Enables coefficient rounding adaptation for chroma
AdaptRndWFactorIRef = 4 # Adaptive Rounding Weight for I/SI slices in reference pictures /4096
AdaptRndWFactorPRef = 4 # Adaptive Rounding Weight for P/SP slices in reference pictures /4096
AdaptRndWFactorBRef = 4 # Adaptive Rounding Weight for B slices in reference pictures /4096
AdaptRndWFactorINRef = 4 # Adaptive Rounding Weight for I/SI slices in non reference pictures /4096
AdaptRndWFactorPNRef = 4 # Adaptive Rounding Weight for P/SP slices in non reference pictures /4096
AdaptRndWFactorBNRef = 4 # Adaptive Rounding Weight for B slices in non reference pictures /4096
AdaptRndCrWFactorIRef = 4 # Chroma Adaptive Rounding Weight for I/SI slices in reference pictures /4096
AdaptRndCrWFactorPRef = 4 # Chroma Adaptive Rounding Weight for P/SP slices in reference pictures /4096
AdaptRndCrWFactorBRef = 4 # Chroma Adaptive Rounding Weight for B slices in reference pictures /4096
AdaptRndCrWFactorINRef = 4 # Chroma Adaptive Rounding Weight for I/SI slices in non reference pictures /4096
AdaptRndCrWFactorPNRef = 4 # Chroma Adaptive Rounding Weight for P/SP slices in non reference pictures /4096
AdaptRndCrWFactorBNRef = 4 # Chroma Adaptive Rounding Weight for B slices in non reference pictures /4096
########################################################################################
#Lossless Coding (FREXT)
########################################################################################
QPPrimeYZeroTransformBypassFlag = 0 # Enable lossless coding when qpprime_y is zero (0 Disabled, 1 Enabled)
########################################################################################
#Fast Motion Estimation Control Parameters
########################################################################################
SearchMode = 0 # Use fast motion estimation (0=disable/default, 1=UMHexagonS,
# 2=Simplified UMHexagonS, 3=EPZS patterns)
UMHexDSR = 1 # Use Search Range Prediction. Only for UMHexagonS method
# (0:disable, 1:enabled/default)
UMHexScale = 3 # Use Scale_factor for different image sizes. Only for UMHexagonS method
# (0:disable, 3:/default)
# Increasing value can speed up Motion Search.
EPZSPattern = 2 # Select EPZS primary refinement pattern.
# (0: small diamond, 1: square, 2: extended diamond/default,
# 3: large diamond, 4: SBP Large Diamond,
# 5: PMVFAST )
EPZSDualRefinement = 3 # Enables secondary refinement pattern.
# (0:disabled, 1: small diamond, 2: square,
# 3: extended diamond/default, 4: large diamond,
# 5: SBP Large Diamond, 6: PMVFAST )
EPZSFixedPredictors = 2 # Enables Window based predictors
# (0:disabled, 1: P only, 2: P and B/default)
EPZSTemporal = 1 # Enables temporal predictors
# (0: disabled, 1: enabled/default)
EPZSSpatialMem = 1 # Enables spatial memory predictors
# (0: disabled, 1: enabled/default)
EPZSMinThresScale = 0 # Scaler for EPZS minimum threshold (0 default).
# Increasing value can speed up encoding.
EPZSMedThresScale = 1 # Scaler for EPZS median threshold (1 default).
# Increasing value can speed up encoding.
EPZSMaxThresScale = 2 # Scaler for EPZS maximum threshold (1 default).
# Increasing value can speed up encoding.
EPZSSubPelME = 1 # EPZS Subpel ME consideration
EPZSSubPelMEBiPred = 1 # EPZS Subpel ME consideration for BiPred partitions
EPZSSubPelThresScale = 2 # EPZS Subpel ME Threshold scaler
EPZSSubPelGrid = 0 # Perform EPZS using a subpixel grid
########################################################################################
# SEI Parameters
########################################################################################
ToneMappingSEIPresentFlag = 0 # Enable Tone mapping SEI (0 Not present, 1 Present)
ToneMappingFile = "ToneMapping.cfg"
GenerateSEIMessage = 0 # Generate an SEI Text Message
SEIMessageText = "H.264/AVC Encoder" # Text SEI Message
################################################################
# VUI Parameters
################################################################
# the variables below do not affect encoding and decoding
# (many are dummy variables but others can be useful
# when supported by the decoder)
EnableVUISupport = 0
# display parameters
VUI_aspect_ratio_info_present_flag = 0
VUI_aspect_ratio_idc = 0
VUI_sar_width = 0
VUI_sar_height = 0
VUI_overscan_info_present_flag = 0
VUI_overscan_appropriate_flag = 0
VUI_video_signal_type_present_flag = 0
VUI_video_format = 5
VUI_video_full_range_flag = 0
VUI_colour_description_present_flag = 0
VUI_colour_primaries = 2
VUI_transfer_characteristics = 2
VUI_matrix_coefficients = 2
VUI_chroma_location_info_present_flag = 0
VUI_chroma_sample_loc_type_top_field = 0
VUI_chroma_sample_loc_type_bottom_field = 0
VUI_timing_info_present_flag = 0
VUI_num_units_in_tick = 1000
VUI_time_scale = 60000
VUI_fixed_frame_rate_flag = 0
# nal hrd parameters
VUI_nal_hrd_parameters_present_flag = 0
VUI_nal_cpb_cnt_minus1 = 0
VUI_nal_bit_rate_scale = 0
VUI_nal_cpb_size_scale = 0
VUI_nal_bit_rate_value_minus1 = 0
VUI_nal_cpb_size_value_minus1 = 0
VUI_nal_vbr_cbr_flag = 0
VUI_nal_initial_cpb_removal_delay_length_minus1 = 23
VUI_nal_cpb_removal_delay_length_minus1 = 23
VUI_nal_dpb_output_delay_length_minus1 = 23
VUI_nal_time_offset_length = 24
# vlc hrd parameters
VUI_vcl_hrd_parameters_present_flag = 0
VUI_vcl_cpb_cnt_minus1 = 0
VUI_vcl_bit_rate_scale = 0
VUI_vcl_cpb_size_scale = 0
VUI_vcl_bit_rate_value_minus1 = 0
VUI_vcl_cpb_size_value_minus1 = 0
VUI_vcl_vbr_cbr_flag = 0
VUI_vcl_initial_cpb_removal_delay_length_minus1 = 23
VUI_vcl_cpb_removal_delay_length_minus1 = 23
VUI_vcl_dpb_output_delay_length_minus1 = 23
VUI_vcl_time_offset_length = 24
VUI_low_delay_hrd_flag = 0
# other params (i.e. bitsream restrictions)
VUI_pic_struct_present_flag = 0
VUI_bitstream_restriction_flag = 0
VUI_motion_vectors_over_pic_boundaries_flag = 1
VUI_max_bytes_per_pic_denom = 0
VUI_max_bits_per_mb_denom = 0
VUI_log2_max_mv_length_vertical = 16
VUI_log2_max_mv_length_horizontal = 16
VUI_num_reorder_frames = 16
VUI_max_dec_frame_buffering = 16
-------------- next part --------------
# New Input File Format is as follows
# <ParameterName> = <ParameterValue> # Comment
#
# See configfile.h for a list of supported ParameterNames
#
# For bug reporting and known issues see:
# https://ipbt.hhi.de
##########################################################################################
# Files
##########################################################################################
InputFile = "C:\VS\JM_13\bin\sequencesYUV\1280x720p\720p50_mobcal_ter.yuv" # Input sequence
InputHeaderLength = 0 # If the inputfile has a header, state it's length in byte here
StartFrame = 2 # Start frame for encoding. (0-N)
FramesToBeEncoded = 1 # Number of frames to be coded
FrameRate = 50.0 # Frame Rate per second (0.1-100.0)
SourceWidth = 1280 # Frame width
SourceHeight = 720 # Frame height
TraceFile = "trace_enc.txt" # Trace file
ReconFile = "C:\VS\JM_13\bin\Recon\resultats\mobcal_res2.yuv" # Recontruction YUV file
OutputFile = "C:\VS\JM_13\bin\flux264\resultats\mobcal_res2.264" # Bitstream
##########################################################################################
# Encoder Control
##########################################################################################
ProfileIDC = 77# Profile IDC (66=baseline, 77=main, 88=extended; FREXT Profiles: 100=High, 110=High 10, 122=High 4:2:2, 244=High 4:4:4, 44=CAVLC 4:4:4 Intra)
IntraProfile = 0 # Activate Intra Profile for FRExt (0: false, 1: true)
# (e.g. ProfileIDC=110, IntraProfile=1 => High 10 Intra Profile)
LevelIDC = 40 # Level IDC (e.g. 20 = level 2.0)
IntraPeriod = 3 # Period of I-pictures (0=only first)
IDRPeriod = 0 # Period of IDR pictures (0=only first)
AdaptiveIntraPeriod = 1 # Adaptive intra period
AdaptiveIDRPeriod = 1 # Adaptive IDR period
IntraDelay = 0 # Intra (IDR) picture delay (i.e. coding structure of PPIPPP... )
EnableIDRGOP = 0 # Support for IDR closed GOPs (0: disabled, 1: enabled)
EnableOpenGOP = 0 # Support for open GOPs (0: disabled, 1: enabled)
QPISlice = 30# Quant. param for I Slices (0-51)
QPPSlice = 30# Quant. param for P Slices (0-51)
FrameSkip = 2 # Number of frames to be skipped in input (e.g 2 will code every third frame)
ChromaQPOffset = 0 # Chroma QP offset (-51..51)
DisableSubpelME = 0 # Disable Subpixel Motion Estimation (0=off/default, 1=on)
SearchRange = 16 # Max search range
MEDistortionFPel = 0 # Select error metric for Full-Pel ME (0: SAD, 1: SSE, 2: Hadamard SAD)
MEDistortionHPel = 0 # Select error metric for Half-Pel ME (0: SAD, 1: SSE, 2: Hadamard SAD)
MEDistortionQPel = 0 # Select error metric for Quarter-Pel ME (0: SAD, 1: SSE, 2: Hadamard SAD)
MDDistortion = 0 # Select error metric for Mode Decision (0: SAD, 1: SSE, 2: Hadamard SAD)
ChromaMCBuffer = 1 # Calculate Color component interpolated values in advance and store them.
# Provides a trade-off between memory and computational complexity
# (0: disabled/default, 1: enabled)
ChromaMEEnable = 0 # Take into account Color component information during ME
# (0: only first component/default,
# 1: All Color components - Integer refinement only
# 2: All Color components - All refinements)
ChromaMEWeight = 4 # Weighting for chroma components. This parameter should have a relationship with color format.
NumberReferenceFrames = 5 # Number of previous frames used for inter motion search (0-16)
PList0References = 0 # P slice List 0 reference override (0 disable, N <= NumberReferenceFrames)
Log2MaxFNumMinus4 = 0 # Sets log2_max_frame_num_minus4 (-1 : based on FramesToBeEncoded/Auto, >=0 : Log2MaxFNumMinus4)
Log2MaxPOCLsbMinus4 = -1 # Sets log2_max_pic_order_cnt_lsb_minus4 (-1 : Auto, >=0 : Log2MaxPOCLsbMinus4)
GenerateMultiplePPS = 0 # Transmit multiple parameter sets. Currently parameters basically enable all WP modes (0: diabled, 1: enabled)
ResendPPS = 0 # Resend PPS (with pic_parameter_set_id 0) for every coded Frame/Field pair (0: disabled, 1: enabled)
MbLineIntraUpdate = 0 # Error robustness(extra intra macro block updates)(0=off, N: One GOB every N frames are intra coded)
RandomIntraMBRefresh = 0 # Forced intra MBs per picture
PSliceSkip = 1 # P-Slice Skip mode consideration (0=disable, 1=enable)
PSliceSearch16x16 = 1 # P-Slice Inter block search 16x16 (0=disable, 1=enable)
PSliceSearch16x8 = 0 # P-Slice Inter block search 16x8 (0=disable, 1=enable)
PSliceSearch8x16 = 0 # P-Slice Inter block search 8x16 (0=disable, 1=enable)
PSliceSearch8x8 = 1 # P-Slice Inter block search 8x8 (0=disable, 1=enable)
PSliceSearch8x4 = 0 # P-Slice Inter block search 8x4 (0=disable, 1=enable)
PSliceSearch4x8 = 0 # P-Slice Inter block search 4x8 (0=disable, 1=enable)
PSliceSearch4x4 = 0 # P-Slice Inter block search 4x4 (0=disable, 1=enable)
BSliceSkip = 1 # B-Slice Skip mode consideration (0=disable, 1=enable)
BSliceSearch16x16 = 1 # B-Slice Inter block search 16x16 (0=disable, 1=enable)
BSliceSearch16x8 = 0 # B-Slice Inter block search 16x8 (0=disable, 1=enable)
BSliceSearch8x16 = 0 # B-Slice Inter block search 8x16 (0=disable, 1=enable)
BSliceSearch8x8 = 1 # B-Slice Inter block search 8x8 (0=disable, 1=enable)
BSliceSearch8x4 = 0 # B-Slice Inter block search 8x4 (0=disable, 1=enable)
BSliceSearch4x8 = 0 # B-Slice Inter block search 4x8 (0=disable, 1=enable)
BSliceSearch4x4 = 0 # B-Slice Inter block search 4x4 (0=disable, 1=enable)
DisableIntraInInter = 0 # Disable Intra modes for inter slices
IntraDisableInterOnly = 0 # Apply Disabling Intra conditions only to Inter Slices (0:disable/default,1: enable)
Intra4x4ParDisable = 1 # Disable Vertical & Horizontal 4x4
Intra4x4DiagDisable = 1 # Disable Diagonal 45degree 4x4
Intra4x4DirDisable = 1 # Disable Other Diagonal 4x4
Intra16x16ParDisable = 1 # Disable Vertical & Horizontal 16x16
Intra16x16PlaneDisable = 1 # Disable Planar 16x16
ChromaIntraDisable = 0 # Disable Intra Chroma modes other than DC
EnableIPCM = 1 # Enable IPCM macroblock mode
DisposableP = 0 # Enable Disposable P slices in the primary layer (0: disable/default, 1: enable)
DispPQPOffset = 0 # Quantizer offset for disposable P slices (0: default)
##########################################################################################
# B Slices
##########################################################################################
NumberBFrames = 2 # Number of B coded frames inserted (0=not used)
QPBSlice = 30 # Quant. param for B slices (0-51)
BRefPicQPOffset = -1 # Quantization offset for reference B coded pictures (-51..51)
DirectModeType = 1 # Direct Mode Type (0:Temporal 1:Spatial)
DirectInferenceFlag = 1 # Direct Inference Flag (0: Disable 1: Enable)
BList0References = 0 # B slice List 0 reference override (0 disable, N <= NumberReferenceFrames)
BList1References = 1 # B slice List 1 reference override (0 disable, N <= NumberReferenceFrames)
# 1 List1 reference is usually recommended for normal GOP Structures.
# A larger value is usually more appropriate if a more flexible
# structure is used (i.e. using HierarchicalCoding)
BReferencePictures = 0 # Referenced B coded pictures (0=off, 1=B references for secondary layer, 2=B references for primary layer)
HierarchicalCoding = 0 # B hierarchical coding (0= off, 1= 2 layers, 2= 2 full hierarchy, 3 = explicit)
HierarchyLevelQPEnable = 1 # Adjust QP based on hierarchy level (in increments of 1). Overrides BRefPicQPOffset behavior.(0=off, 1=on)
ExplicitHierarchyFormat = "b1r0b3r0b2e2b0e2b4r2" # Explicit Enhancement GOP. Format is {FrameDisplay_orderReferenceQP}.
# Valid values for reference type is r:reference, e:non reference.
ReferenceReorder = 1 # Reorder References according to Poc distance for HierarchicalCoding (0=off, 1=enable)
PocMemoryManagement = 1 # Memory management based on Poc Distances for HierarchicalCoding (0=off, 1=on)
BiPredMotionEstimation = 1 # Enable Bipredictive based Motion Estimation (0:disabled, 1:enabled)
BiPredMERefinements = 3 # Bipredictive ME extra refinements (0: single, N: N extra refinements (1 default)
BiPredMESearchRange = 16 # Bipredictive ME Search range (8 default). Note that range is halved for every extra refinement.
BiPredMESubPel = 2 # Bipredictive ME Subpixel Consideration (0: disabled, 1: single level, 2: dual level)
##########################################################################################
# SP Frames
##########################################################################################
SPPicturePeriodicity = 0 # SP-Picture Periodicity (0=not used)
QPSPSlice = 36 # Quant. param of SP-Slices for Prediction Error (0-51)
QPSP2Slice = 35 # Quant. param of SP-Slices for Predicted Blocks (0-51)
SI_FRAMES = 0 # SI frame encoding flag (0=not used, 1=used)
SP_output = 0 # Controls whether coefficients will be output to encode switching SP frames (0=no, 1=yes)
SP_output_name = "low_quality.dat" # Filename for SP output coefficients
SP2_FRAMES = 0 # switching SP frame encoding flag (0=not used, 1=used)
SP2_input_name1 = "high_quality.dat" # Filename for the first swithed bitstream coefficients
SP2_input_name2 = "low_quality.dat" # Filename for the second switched bitstream coefficients
##########################################################################################
# Output Control, NALs
##########################################################################################
SymbolMode = 0 # Symbol mode (Entropy coding method: 0=UVLC, 1=CABAC)
OutFileMode = 0 # Output file mode, 0:Annex B, 1:RTP
PartitionMode = 0 # Partition Mode, 0: no DP, 1: 3 Partitions per Slice
##########################################################################################
# CABAC context initialization
##########################################################################################
ContextInitMethod = 1 # Context init (0: fixed, 1: adaptive)
FixedModelNumber = 0 # model number for fixed decision for inter slices ( 0, 1, or 2 )
##########################################################################################
# Interlace Handling
#########################################################################################
PicInterlace = 0 # Picture AFF (0: frame coding, 1: field coding, 2:adaptive frame/field coding)
MbInterlace = 0 # Macroblock AFF (0: frame coding, 1: field coding, 2:adaptive frame/field coding, 3: frame MB-only AFF)
IntraBottom = 0 # Force Intra Bottom at GOP Period
##########################################################################################
# Weighted Prediction
#########################################################################################
WeightedPrediction = 0 # P picture Weighted Prediction (0=off, 1=explicit mode)
WeightedBiprediction = 0 # B picture Weighted Prediciton (0=off, 1=explicit mode, 2=implicit mode)
UseWeightedReferenceME = 1 # Use weighted reference for ME (0=off, 1=on)
##########################################################################################
# Picture based Multi-pass encoding
#########################################################################################
RDPictureDecision = 0 # Perform RD optimal decision between different coded picture versions.
# If GenerateMultiplePPS is enabled then this will test different WP methods.
# Otherwise it will test QP +-1 (0: disabled, 1: enabled)
RDPictureIntra = 0 # Perform RD optimal decision also for intra coded pictures (0: disabled (default), 1: enabled).
RDPSliceWeightOnly = 1 # Only consider Weighted Prediction for P slices in Picture RD decision. (0: disabled, 1: enabled (default))
RDBSliceWeightOnly = 0 # Only consider Weighted Prediction for B slices in Picture RD decision. (0: disabled (default), 1: enabled )
##########################################################################################
# Loop filter parameters
##########################################################################################
LoopFilterParametersFlag = 1 # Configure loop filter (0=parameter below ingored, 1=parameters sent)
LoopFilterDisable = 1 # Disable loop filter in slice header (0=Filter, 1=No Filter)
LoopFilterAlphaC0Offset = 0 # Alpha & C0 offset div. 2, {-6, -5, ... 0, +1, .. +6}
LoopFilterBetaOffset = 0 # Beta offset div. 2, {-6, -5, ... 0, +1, .. +6}
##########################################################################################
# Error Resilience / Slices
##########################################################################################
SliceMode = 0 # Slice mode (0=off 1=fixed #mb in slice 2=fixed #bytes in slice 3=use callback)
SliceArgument = 50 # Slice argument (Arguments to modes 1 and 2 above)
num_slice_groups_minus1 = 0 # Number of Slice Groups Minus 1, 0 == no FMO, 1 == two slice groups, etc.
slice_group_map_type = 0 # 0: Interleave, 1: Dispersed, 2: Foreground with left-over,
# 3: Box-out, 4: Raster Scan 5: Wipe
# 6: Explicit, slice_group_id read from SliceGroupConfigFileName
slice_group_change_direction_flag = 0 # 0: box-out clockwise, raster scan or wipe right,
# 1: box-out counter clockwise, reverse raster scan or wipe left
slice_group_change_rate_minus1 = 85 #
SliceGroupConfigFileName = "sg0conf.cfg" # Used for slice_group_map_type 0, 2, 6
UseRedundantPicture = 0 # 0: not used, 1: enabled
NumRedundantHierarchy = 1 # 0-4
PrimaryGOPLength = 10 # GOP length for redundant allocation (1-16)
# NumberReferenceFrames must be no less than PrimaryGOPLength when redundant slice enabled
NumRefPrimary = 1 # Actually used number of references for primary slices (1-16)
##########################################################################################
# Search Range Restriction / RD Optimization
##########################################################################################
RestrictSearchRange = 2 # restriction for (0: blocks and ref, 1: ref, 2: no restrictions)
RDOptimization = 1 # rd-optimized mode decision
# 0: RD-off (Low complexity mode)
# 1: RD-on (High complexity mode)
# 2: RD-on (Fast high complexity mode - not work in FREX Profiles)
# 3: with losses
CtxAdptLagrangeMult = 0 # Context Adaptive Lagrange Multiplier
# 0: disabled (default)
# 1: enabled (works best when RDOptimization=0)
FastCrIntraDecision = 1 # Fast Chroma intra mode decision (0:off, 1:on)
DisableThresholding = 0 # Disable Thresholding of Transform Coefficients (0:off, 1:on)
DisableBSkipRDO = 0 # Disable B Skip Mode consideration from RDO Mode decision (0:off, 1:on)
SkipIntraInInterSlices = 0 # Skips Intra mode checking in inter slices if certain mode decisions are satisfied (0: off, 1: on)
WeightY = 1 # Luma weight for RDO
WeightCb = 1 # Cb weight for RDO
WeightCr = 1 # Cr weight for RDO
##########################################################################################
# Explicit Lambda Usage
##########################################################################################
UseExplicitLambdaParams = 0 # Use explicit lambda scaling parameters (0:disabled, 1:enable lambda weight, 2: use explicit lambda value)
FixedLambdaIslice = 0.1 # Fixed Lambda value for I slices
FixedLambdaPslice = 0.1 # Fixed Lambda value for P slices
FixedLambdaBslice = 0.1 # Fixed Lambda value for B slices
FixedLambdaRefBslice = 0.1 # Fixed Lambda value for Referenced B slices
FixedLambdaSPslice = 0.1 # Fixed Lambda value for SP slices
FixedLambdaSIslice = 0.1 # Fixed Lambda value for SI slices
LambdaWeightIslice = 0.65 # scaling param for I slices. This will be used as a multiplier i.e. lambda=LambdaWeightISlice * 2^((QP-12)/3)
LambdaWeightPslice = 0.68 # scaling param for P slices. This will be used as a multiplier i.e. lambda=LambdaWeightPSlice * 2^((QP-12)/3)
LambdaWeightBslice = 2.00 # scaling param for B slices. This will be used as a multiplier i.e. lambda=LambdaWeightBSlice * 2^((QP-12)/3)
LambdaWeightRefBslice = 1.50 # scaling param for Referenced B slices. This will be used as a multiplier i.e. lambda=LambdaWeightRefBSlice * 2^((QP-12)/3)
LambdaWeightSPslice = 1.50 # scaling param for SP slices. This will be used as a multiplier i.e. lambda=LambdaWeightSPSlice * 2^((QP-12)/3)
LambdaWeightSIslice = 0.65 # scaling param for SI slices. This will be used as a multiplier i.e. lambda=LambdaWeightSISlice * 2^((QP-12)/3)
LossRateA = 5 # expected packet loss rate of the channel for the first partition, only valid if RDOptimization = 3
LossRateB = 0 # expected packet loss rate of the channel for the second partition, only valid if RDOptimization = 3
LossRateC = 0 # expected packet loss rate of the channel for the third partition, only valid if RDOptimization = 3
NumberOfDecoders = 30 # Numbers of decoders used to simulate the channel, only valid if RDOptimization = 3
RestrictRefFrames = 0 # Doesnt allow reference to areas that have been intra updated in a later frame.
##########################################################################################
# Additional Stuff
#########################################################################################
UseConstrainedIntraPred = 0 # If 1, Inter pixels are not used for Intra macroblock prediction.
LastFrameNumber = 0 # Last frame number that have to be coded (0: no effect)
ChangeQPI = 16 # QP (I-slices) for second part of sequence (0-51)
ChangeQPP = 16 # QP (P-slices) for second part of sequence (0-51)
ChangeQPB = 18 # QP (B-slices) for second part of sequence (0-51)
ChangeQPBSRefOffset = 2 # QP offset (stored B-slices) for second part of sequence (-51..51)
ChangeQPStart = 0 # Frame no. for second part of sequence (0: no second part)
NumberofLeakyBuckets = 2 # Number of Leaky Bucket values
LeakyBucketRateFile = "leakybucketrate.cfg" # File from which encoder derives rate values
LeakyBucketParamFile = "leakybucketparam.cfg" # File where encoder stores leakybucketparams
NumberFramesInEnhancementLayerSubSequence = 0 # number of frames in the Enhanced Scalability Layer(0: no Enhanced Layer)
SparePictureOption = 0 # (0: no spare picture info, 1: spare picture available)
SparePictureDetectionThr = 6 # Threshold for spare reference pictures detection
SparePicturePercentageThr = 92 # Threshold for the spare macroblock percentage
PicOrderCntType = 0 # (0: POC mode 0, 1: POC mode 1, 2: POC mode 2)
########################################################################################
#Rate control
########################################################################################
RateControlEnable = 0 # 0 Disable, 1 Enable
Bitrate = 45020 # Bitrate(bps)
InitialQP = 0 # Initial Quantization Parameter for the first I frame
# InitialQp depends on two values: Bits Per Picture,
# and the GOP length
BasicUnit = 11 # Number of MBs in the basic unit
# should be a fractor of the total number
# of MBs in a frame
ChannelType = 0 # type of channel( 1=time varying channel; 0=Constant channel)
RCUpdateMode = 0 # Rate Control type. Modes supported :
# 0 = original JM rate control,
# 1 = rate control that is applied to all frames regardless of the slice type,
# 2 = original plus intelligent QP selection for I and B slices (including Hierarchical),
# 3 = original + hybrid quadratic rate control for I and B slice using bit rate statistics
#
RCISliceBitRatio = 1.0 # target ratio of bits for I-coded pictures compared to P-coded Pictures (for RCUpdateMode=3)
RCBSliceBitRatio0 = 0.5 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 0 (for RCUpdateMode=3)
RCBSliceBitRatio1 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 1 (for RCUpdateMode=3)
RCBSliceBitRatio2 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 2 (for RCUpdateMode=3)
RCBSliceBitRatio3 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 3 (for RCUpdateMode=3)
RCBSliceBitRatio4 = 0.25 # target ratio of bits for B-coded pictures compared to P-coded Pictures - temporal level 4 (for RCUpdateMode=3)
RCBoverPRatio = 0.45 # ratio of bit rate usage of a B-coded picture over a P-coded picture for the SAME QP (for RCUpdateMode=3)
RCIoverPRatio = 3.80 # ratio of bit rate usage of an I-coded picture over a P-coded picture for the SAME QP (for RCUpdateMode=3)
RCMinQPPSlice = 8 # minimum P Slice QP value for rate control
RCMaxQPPSlice = 40 # maximum P Slice QP value for rate control
RCMinQPBSlice = 8 # minimum B Slice QP value for rate control
RCMaxQPBSlice = 46 # maximum B Slice QP value for rate control
RCMinQPISlice = 8 # minimum I Slice QP value for rate control
RCMaxQPISlice = 36 # maximum I Slice QP value for rate control
RCMinQPSPSlice = 8 # minimum SP Slice QP value for rate control
RCMaxQPSPSlice = 40 # maximum SP Slice QP value for rate control
RCMinQPSISlice = 8 # minimum SI Slice QP value for rate control
RCMaxQPSISlice = 36 # maximum SI Slice QP value for rate control
########################################################################################
#Fast Mode Decision
########################################################################################
EarlySkipEnable = 0 # Early skip detection (0: Disable 1: Enable)
SelectiveIntraEnable = 0 # Selective Intra mode decision (0: Disable 1: Enable)
########################################################################################
#FREXT stuff
########################################################################################
YUVFormat = 1 # YUV format (0=4:0:0, 1=4:2:0, 2=4:2:2, 3=4:4:4)
RGBInput = 0 # 1=RGB input, 0=GBR or YUV input
SeparateColourPlane = 0 # 4:4:4 coding: 0=Common mode, 1=Independent mode
BitDepthLuma = 8 # Bit Depth for Luminance (8...12 bits)
BitDepthChroma = 8 # Bit Depth for Chrominance (8...12 bits)
CbQPOffset = 0 # Chroma QP offset for Cb-part (-51..51)
CrQPOffset = 0 # Chroma QP offset for Cr-part (-51..51)
Transform8x8Mode = 0 # (0: only 4x4 transform, 1: allow using 8x8 transform additionally, 2: only 8x8 transform)
ReportFrameStats = 0 # (0:Disable Frame Statistics 1: Enable)
DisplayEncParams = 0 # (0:Disable Display of Encoder Params 1: Enable)
Verbose = 1 # level of display verboseness (0:short, 1:normal, 2:detailed)
########################################################################################
#Q-Matrix (FREXT)
########################################################################################
QmatrixFile = "q_matrix.cfg"
ScalingMatrixPresentFlag = 0 # Enable Q_Matrix (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag0 = 3 # Intra4x4_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag1 = 3 # Intra4x4_ChromaU (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag2 = 3 # Intra4x4_chromaV (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag3 = 3 # Inter4x4_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag4 = 3 # Inter4x4_ChromaU (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag5 = 3 # Inter4x4_ChromaV (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag6 = 3 # Intra8x8_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag7 = 3 # Inter8x8_Luma (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag8 = 1 # Intra8x8_ChromaU for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag9 = 3 # Inter8x8_ChromaU for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag10 = 2 # Intra8x8_ChromaV for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
ScalingListPresentFlag11 = 3 # Inter8x8_ChromaV for 4:4:4 (0 Not present, 1 Present in SPS, 2 Present in PPS, 3 Present in both SPS & PPS)
########################################################################################
#Rounding Offset control
########################################################################################
OffsetMatrixPresentFlag = 1 # Enable Explicit Offset Quantization Matrices (0: disable 1: enable)
QOffsetMatrixFile = "q_offset.cfg" # Explicit Quantization Matrices file
AdaptiveRounding = 1 # Enable Adaptive Rounding based on JVT-N011 (0: disable, 1: enable)
AdaptRoundingFixed = 1 # Enable Global Adaptive rounding for all qps (0: disable, 1: enable - default/old)
AdaptRndPeriod = 1 # Period in terms of MBs for updating rounding offsets.
# 0 performs update at the picture level. Default is 16. 1 is as in JVT-N011.
AdaptRndChroma = 1 # Enables coefficient rounding adaptation for chroma
AdaptRndWFactorIRef = 4 # Adaptive Rounding Weight for I/SI slices in reference pictures /4096
AdaptRndWFactorPRef = 4 # Adaptive Rounding Weight for P/SP slices in reference pictures /4096
AdaptRndWFactorBRef = 4 # Adaptive Rounding Weight for B slices in reference pictures /4096
AdaptRndWFactorINRef = 4 # Adaptive Rounding Weight for I/SI slices in non reference pictures /4096
AdaptRndWFactorPNRef = 4 # Adaptive Rounding Weight for P/SP slices in non reference pictures /4096
AdaptRndWFactorBNRef = 4 # Adaptive Rounding Weight for B slices in non reference pictures /4096
AdaptRndCrWFactorIRef = 4 # Chroma Adaptive Rounding Weight for I/SI slices in reference pictures /4096
AdaptRndCrWFactorPRef = 4 # Chroma Adaptive Rounding Weight for P/SP slices in reference pictures /4096
AdaptRndCrWFactorBRef = 4 # Chroma Adaptive Rounding Weight for B slices in reference pictures /4096
AdaptRndCrWFactorINRef = 4 # Chroma Adaptive Rounding Weight for I/SI slices in non reference pictures /4096
AdaptRndCrWFactorPNRef = 4 # Chroma Adaptive Rounding Weight for P/SP slices in non reference pictures /4096
AdaptRndCrWFactorBNRef = 4 # Chroma Adaptive Rounding Weight for B slices in non reference pictures /4096
########################################################################################
#Lossless Coding (FREXT)
########################################################################################
QPPrimeYZeroTransformBypassFlag = 0 # Enable lossless coding when qpprime_y is zero (0 Disabled, 1 Enabled)
########################################################################################
#Fast Motion Estimation Control Parameters
########################################################################################
SearchMode = 0 # Use fast motion estimation (0=disable/default, 1=UMHexagonS,
# 2=Simplified UMHexagonS, 3=EPZS patterns)
UMHexDSR = 1 # Use Search Range Prediction. Only for UMHexagonS method
# (0:disable, 1:enabled/default)
UMHexScale = 3 # Use Scale_factor for different image sizes. Only for UMHexagonS method
# (0:disable, 3:/default)
# Increasing value can speed up Motion Search.
EPZSPattern = 2 # Select EPZS primary refinement pattern.
# (0: small diamond, 1: square, 2: extended diamond/default,
# 3: large diamond, 4: SBP Large Diamond,
# 5: PMVFAST )
EPZSDualRefinement = 3 # Enables secondary refinement pattern.
# (0:disabled, 1: small diamond, 2: square,
# 3: extended diamond/default, 4: large diamond,
# 5: SBP Large Diamond, 6: PMVFAST )
EPZSFixedPredictors = 2 # Enables Window based predictors
# (0:disabled, 1: P only, 2: P and B/default)
EPZSTemporal = 1 # Enables temporal predictors
# (0: disabled, 1: enabled/default)
EPZSSpatialMem = 1 # Enables spatial memory predictors
# (0: disabled, 1: enabled/default)
EPZSMinThresScale = 0 # Scaler for EPZS minimum threshold (0 default).
# Increasing value can speed up encoding.
EPZSMedThresScale = 1 # Scaler for EPZS median threshold (1 default).
# Increasing value can speed up encoding.
EPZSMaxThresScale = 2 # Scaler for EPZS maximum threshold (1 default).
# Increasing value can speed up encoding.
EPZSSubPelME = 1 # EPZS Subpel ME consideration
EPZSSubPelMEBiPred = 1 # EPZS Subpel ME consideration for BiPred partitions
EPZSSubPelThresScale = 2 # EPZS Subpel ME Threshold scaler
EPZSSubPelGrid = 1 # Perform EPZS using a subpixel grid
########################################################################################
# SEI Parameters
########################################################################################
ToneMappingSEIPresentFlag = 0 # Enable Tone mapping SEI (0 Not present, 1 Present)
ToneMappingFile = "ToneMapping.cfg"
GenerateSEIMessage = 0 # Generate an SEI Text Message
SEIMessageText = "H.264/AVC Encoder" # Text SEI Message
########################################################################################
# VUI Parameters
########################################################################################
# the variables below do not affect encoding and decoding
# (many are dummy variables but others can be useful when supported by the decoder)
EnableVUISupport = 0 # Enable VUI Parameters
VUI_aspect_ratio_info_present_flag = 0
VUI_aspect_ratio_idc = 1
VUI_sar_width = 0
VUI_sar_height = 0
VUI_overscan_info_present_flag = 0
VUI_overscan_appropriate_flag = 0
VUI_video_signal_type_present_flag = 0
VUI_video_format = 5
VUI_video_full_range_flag = 0
VUI_colour_description_present_flag = 0
VUI_colour_primaries = 2
VUI_transfer_characteristics = 2
VUI_matrix_coefficients = 2
VUI_chroma_location_info_present_flag = 0
VUI_chroma_sample_loc_type_top_field = 0
VUI_chroma_sample_loc_type_bottom_field = 0
VUI_timing_info_present_flag = 0
VUI_num_units_in_tick = 1000
VUI_time_scale = 60000
VUI_fixed_frame_rate_flag = 0
# nal hrd parameters
VUI_nal_hrd_parameters_present_flag = 0
VUI_nal_cpb_cnt_minus1 = 0
VUI_nal_bit_rate_scale = 0
VUI_nal_cpb_size_scale = 0
VUI_nal_bit_rate_value_minus1 = 0
VUI_nal_cpb_size_value_minus1 = 0
VUI_nal_vbr_cbr_flag = 0
VUI_nal_initial_cpb_removal_delay_length_minus1 = 23
VUI_nal_cpb_removal_delay_length_minus1 = 23
VUI_nal_dpb_output_delay_length_minus1 = 23
VUI_nal_time_offset_length = 24
# vlc hrd parameters
VUI_vcl_hrd_parameters_present_flag = 0
VUI_vcl_cpb_cnt_minus1 = 0
VUI_vcl_bit_rate_scale = 0
VUI_vcl_cpb_size_scale = 0
VUI_vcl_bit_rate_value_minus1 = 0
VUI_vcl_cpb_size_value_minus1 = 0
VUI_vcl_vbr_cbr_flag = 0
VUI_vcl_initial_cpb_removal_delay_length_minus1 = 23
VUI_vcl_cpb_removal_delay_length_minus1 = 23
VUI_vcl_dpb_output_delay_length_minus1 = 23
VUI_vcl_time_offset_length = 24
VUI_low_delay_hrd_flag = 0
# other params (i.e. bitsream restrictions)
VUI_pic_struct_present_flag = 0
VUI_bitstream_restriction_flag = 0
VUI_motion_vectors_over_pic_boundaries_flag = 1
VUI_max_bytes_per_pic_denom = 0
VUI_max_bits_per_mb_denom = 0
VUI_log2_max_mv_length_vertical = 16
VUI_log2_max_mv_length_horizontal = 16
VUI_num_reorder_frames = 16
VUI_max_dec_frame_buffering = 16
More information about the Mp4-tech
mailing list